Stock radio questions

Faults and Technical chat for the Nissan Pulsar
Post Reply
MarcinJ
Posts: 11
Joined: Sun Aug 11, 2019 5:34 pm

Stock radio questions

Post by MarcinJ » Sun Aug 18, 2019 6:50 pm

I have some concerns about the stock head unit as well as upgrading to a higher one.
Right now I have the most basic version, since manual AC version doesn't have the touch screen one.

I'm about to upgrade to a 2DIN full touchscreen radio, but before I'd like to know some facts.

First - does the stock radio have any code that needs to be given after power loss. Like when I replace the battery or simply disconnect the radio to do some measuring before fitting the 2DIN?

For those who upgraded their radios for aftermarket ones - do I need any kind of interface between steering wheel and the radio to keep the controls from the steering wheel working?

I found something like this so I guess I'll be needing it together with a radio?

http://www.connects2downloads.co.uk/C2/files/InstallationGuides/CTSNS011.2.pdf


kt53
Posts: 521
Joined: Sun Nov 13, 2016 4:29 pm

Re: Stock radio questions

Post by kt53 » Sun Aug 18, 2019 9:17 pm

When I purchased mine I was told there is no radio code.


User avatar
mrrichmond1995
Posts: 316
Joined: Wed Jun 08, 2016 2:16 pm
Location: Chelmsford, Essex
Contact:

Re: Stock radio questions

Post by mrrichmond1995 » Wed Aug 28, 2019 7:45 am

Hey There.

I have done a full custom audio build in my Pulsar.

The factory radio does not have a code, as it uses canbus it is coded to the car.

That steering wheel control adapter is the one you want, its the one I am using.

You will need an aerial adapter as well: https://www.dynamicsounds.co.uk/connects2-ct27aa75-nissan-all-models-2007-din-aerial-antenna-adaptor.html
Nissan Pulsar C13 Owners Club
Mod List:
Lowered 30mm
Stage 1 Remap 138bhp 307nm
18x8j ET42 Gunmetal Bola B10 Alloys
Braided Brake Lines
Backbox Delete
Custom Audio Build
Full LED Light Conversion
Detachable Tow Bar


MarcinJ
Posts: 11
Joined: Sun Aug 11, 2019 5:34 pm

Re: Stock radio questions

Post by MarcinJ » Thu Aug 29, 2019 5:42 am

The OEM radio doesn't have a code indeed. I've removed it and when plugged in again it started without any problems.
I need this https://www.ebay.co.uk/itm/CTSNS009-2-Steering-Wheel-Stalk-Control-Adaptor-for-Nissan-Pulsar-2014/372395211390 since my car is Visia version (no 2DIN navi) to get my controls working.
I got myself a GMS / AMC radio with Nissan harness but without the steering wheel adaptor. I had to handmade the radio panel since Visia is not prepared for a 2DIN radio at all, but it works.
All I need now is getting the controls from the steering wheel to work (already working on it) and probably switch the power supply so it runs without the ignition key (right now I need to have my ignition on the ON position to keep the radio running).

During installation:

20190828_205202.jpg

20190828_193007.jpg

And I'll make a small DYI of the whole process for people interested.


Post Reply

Return to “Faults & Technical”