Hi Guys new to the forum but need some advice.
I have a 2015 1.2 Tekna pulsar.
I had a fault with the battery which was changed. I'm not sure if this is related but after that the heater will not change blower direction and the temp does not change.
I have checked the usual culprits like fuses relays etc with no fault found.
Before I get into the main components I thought I would ask to see if anybody else had this problem.
Thanks in advance
Andy
A/C & heater controls
You need programming tools, should recommend you to do it at a Nissan workshop and get help if acc problems remains after programming.
Last time when i change myself the battery, i don't need any programming tools. After the new battery is installed, i can start the car right up without the need to set anything up. I just lost the logs of CO2 saving, average fuel and lowest fuel consommation but not an important things.
If the programming tools is the OBD reader, then yes, you just need to clear the fault up since you've said there was a fault. Did the fault was mentioned somewhere?
If the programming tools is the OBD reader, then yes, you just need to clear the fault up since you've said there was a fault. Did the fault was mentioned somewhere?