Nissan Pulsar Forums

Has anyone put an aftermarket sat nav in a pulsar rather than the connect system ? also would the cameras still work on an aftermarket display ?

jtodaj wrote:Has anyone put an aftermarket sat nav in a pulsar rather than the connect system ? also would the cameras still work on an aftermarket display ?

This is what I am trying to find out too!

From what I have gathered the factory connect unit is a standard double din sized unit, however Connects2 do make a fascia adapter: http://www.connects2.co.uk/Product/ProductItem/CT23NS27

Connects2 do make a steering wheel control adapter: http://www.connects2.co.uk/Product/Prod ... CTSNS011.2
It doesnt state if it is for the pulsar that came with connect navigation from the factory but from the looks of it it doesnt have a RCA connector for the reversing camera.

You may have to start checking pins for signal and see if one of them is the reversing camera then wire a RCA plug onto it so you can use the factory camera

As for an aerial adapter you will need this one: http://www.connects2.co.uk/Product/ProductItem/CT27AA27

mrrichmond1995 wrote:

jtodaj wrote:Has anyone put an aftermarket sat nav in a pulsar rather than the connect system ? also would the cameras still work on an aftermarket display ?

This is what I am trying to find out too!

From what I have gathered the factory connect unit is a standard double din sized unit, however Connects2 do make a fascia adapter: http://www.connects2.co.uk/Product/ProductItem/CT23NS27

Connects2 do make a steering wheel control adapter: http://www.connects2.co.uk/Product/Prod ... CTSNS011.2
It doesnt state if it is for the pulsar that came with connect navigation from the factory but from the looks of it it doesnt have a RCA connector for the reversing camera.

You may have to start checking pins for signal and see if one of them is the reversing camera then wire a RCA plug onto it so you can use the factory camera

As for an aerial adapter you will need this one: http://www.connects2.co.uk/Product/ProductItem/CT27AA27

Okay will definitely start looking into this!

I have now completed this whilst retaining the factory reversing camera.

Message me if you want more info

Interested in how this is done if anyone can shoot me some advice?

mrrichmond1995 wrote: ↑Tue May 01, 2018 2:44 pm I have now completed this whilst retaining the factory reversing camera.

Message me if you want more info

Hi!

How did you get this? I've seen the wire from my old Dasaita unit, but it's not easy to pin the yellow RCA wire to the Connects2 - CTSNS011.2 wiring.