Help! - Broken wing mirror housing

Problems using the forum - post here. Not Car Related.
Post Reply
RPJ
Posts: 16
Joined: Tue Oct 20, 2015 4:22 pm

Post by RPJ »

Hi,

I'm hoping for some advice. While driving home from work last night some clown in a white Peugeot (who didn't stop by the way) whacked my driver's side wing mirror. Thankfully the glass didn't break and initially I thought I had only lost the colour coded top trim cover, which I managed to retrieve from the road, but sadly on closer inspection I found that the black housing underneath the mirror was shattered with a big hole in it. I have also noticed since that there is a crack in the plastic where the wing mirror unit connects to the car's door.

Any ideas as to the best way to fix this damage? Would I need to buy a complete replacement unit which would probably be expensive, or could I just purchase the black plastic section that sits under the mirror?

I'd appreciate any suggestions. or guidance, thanks.

kt53
Posts: 626
Joined: Sun Nov 13, 2016 4:29 pm

Post by kt53 »

You could try a vehicle dismantler, but I would expect Pulsar bits to be pretty rare.
fujikun
Posts: 71
Joined: Fri May 04, 2018 12:41 pm

Post by fujikun »

there are a few dismantlers on ebay selling the parts, your best bet is to try them, you never know you might even get one the correct colour.
good luck
Post Reply