Page 1 of 1

A/C & heater controls

Posted: Mon Mar 25, 2019 7:36 pm
by Gilly
Hi Guys new to the forum but need some advice.
I have a 2015 1.2 Tekna pulsar.
I had a fault with the battery which was changed. I'm not sure if this is related but after that the heater will not change blower direction and the temp does not change.
I have checked the usual culprits like fuses relays etc with no fault found.
Before I get into the main components I thought I would ask to see if anybody else had this problem.
Thanks in advance
Andy

Re: A/C & heater controls

Posted: Mon Mar 25, 2019 9:05 pm
by Swe
After battery replacement the computer must be programmed, is this done??

Re: A/C & heater controls

Posted: Wed Mar 27, 2019 6:22 am
by Gilly
No!
Is this something which I can do or does it need to go to a dealer?

Re: A/C & heater controls

Posted: Wed Mar 27, 2019 7:14 am
by Swe
You need programming tools, should recommend you to do it at a Nissan workshop and get help if acc problems remains after programming.

Re: A/C & heater controls

Posted: Wed Mar 27, 2019 8:24 am
by Gilly
Thanks for the help.

Re: A/C & heater controls

Posted: Wed Mar 27, 2019 2:11 pm
by stiyo
Last time when i change myself the battery, i don't need any programming tools. After the new battery is installed, i can start the car right up without the need to set anything up. I just lost the logs of CO2 saving, average fuel and lowest fuel consommation but not an important things.

If the programming tools is the OBD reader, then yes, you just need to clear the fault up since you've said there was a fault. Did the fault was mentioned somewhere?

Re: A/C & heater controls

Posted: Wed May 01, 2019 12:13 pm
by Aturner94
I have this exact problem ! Same thing happened to me the battery died and had to jump it and had a new one put in. The mechanic seems to think it's the fan box.any further information what happened with yours ?