Wiring in dash cam

Faults and Technical chat for the Nissan Pulsar
gezt
Posts: 181
Joined: Sat Feb 25, 2017 5:43 pm
Location: Saddleworth

Post by gezt »

Just tuck it up behind roof panel and side panel.

gezt
Posts: 181
Joined: Sat Feb 25, 2017 5:43 pm
Location: Saddleworth

Post by gezt »

Job done and cable neatly tucked away, thanks Mrrichmond for those pictures,was very useful.
kt53
Posts: 626
Joined: Sun Nov 13, 2016 4:29 pm

Post by kt53 »

gezt wrote: Fri Dec 28, 2018 9:54 am Just tuck it up behind roof panel and side panel.
Can that be done without removal of panels i.e. just push the cable behind the panels? I don't want to start pulling anything off.
gezt
Posts: 181
Joined: Sat Feb 25, 2017 5:43 pm
Location: Saddleworth

Post by gezt »

Yep just push up with fingers or a flat blunt blade.it just stays up there ,on 5he corner you have to be a little harder, then tuck it in the section where the pillar is across to the rubber door seal, flip the lip of door seal back and feed cable down there, no need to take door seal off, when you fit the fuse in if camera doesn't come on turn fuse holder 180 degrees.
kt53
Posts: 626
Joined: Sun Nov 13, 2016 4:29 pm

Post by kt53 »

Thanks for all the help. Still toying with the idea of a dashcam.
Post Reply